Tortuga Village

n°1 hexagonal tower with roof; n°2 towers with roof; n°2 towers; n°2 climbing ladders; n°1 movable bridge; n°1 rope bridge; n°2 bridges climbing; n°1 horizontal climbing; n°1 climbing horizontal rings; n°2 poles; n°1 wall with holds; n°1 wall bars; n°1 swing; n°1 tunnel slide; n°1 slide with bars; n°2 slides; n°3 small benches.
EN_1176
Request Quote
  • Description
  • Map
  • Technical features
  • Request Info
Kids outdoor Play Equipment Tortuga Village. Certificate in accordance with European Standards EN 1176 by the German TÜV - SÜD.
Structure made of wood laminated pine timber autoclave with non-toxic salts.

N°1 turret pool with wooden posts section. 9x9 cm equipped with protective panels in mahogany plywood okoumé grooved phenolic-glued and free of sharp edges and a bench in birch plywood glued with phenol, with knurled non-slip, trimmed with colored films. Dim cm 78x78x260 h
N°2 ladders with rungs made of iroko Ø 45 mm mahogany plywood okoumé grooved phenolic-glued and no edges.
N°1 horizontal climbing made of tubular galvanized steel at 180 °.
N°1 slide bar made with No. 2 round tubes of galvanized steel at 180 °.
N°2 towers with wooden posts section. 9x9 cm equipped with gabled roofs and protective panels both made of mahogany plywood okoumé grooved phenolic-glued and free of sharp edges and a bench for part of birch plywood with phenolic adhesive, non-slip knurled finish, with color films. Dim cm 101x78x350 h.
N°1 tunnel slide h. 150 cm of polyethylene.
N°2 bridges with climbing rope made of nylon with internal steel cable coated in nylon locking nut and colorful.
N°1 back in Sweden consists of rungs iroko Ø 45 mm.
N°1 horizontal climbing with rings made of wooden beam section. 9x12 cm and No. 5 steel rings with non-slip rubber.
N°1 hexagonal tower with wooden posts hexagonal dia. 10 cm equipped with a gabled roof and two protective panels made of mahogany plywood okoumé grooved phenolic-glued and no edges. Diagonal size 146 cm x 73 cm from the side x 350 h.
N°1 slide h. 150 cm of polyethylene.
N°1 bridge made of nylon rope with internal steel cable coated in nylon locking nut and colorful, including planks of wood at the base as support points.
N°1 turret pool with wooden posts section 9x9 cm equipped with protective and decorative panels of mahogany plywood okoumé grooved phenolic-glued and no edges. Dim. cm 101x78x260 h.
N°2 perches made of tubular galvanized steel at 180°C.
N°1 and climbing wall shaped pantograph, made with birch plywood panels finished with phenolic adhesive film on both sides and colored resin marble colored handles.
N°1 swing with wooden posts section 9x9 cm and the beam section of tubular galvanized steel 8x4 cm rectangular painted to 180°C. The seat is made of rubber bumper with internal aluminum profile and chain-mesh welded and hot-galvanized.
All the wooden parts are treated with high-colored stain penetration, non-toxic, wax-based water-soluble.
N°1 turret pool with wooden posts section. 9x9 cm equipped with protective panels in mahogany plywood okoumé grooved phenolic-glued and no edges. Equipped with a bench in birch plywood glued with phenol, with knurled non-slip, trimmed with colored films. Dim. cm 101x78x260 h.
N°1 slide polyethylene h. 150 cm and sides made of mahogany plywood okoumé with phenolic adhesive.
N°1 mobile bridge made of nylon rope with internal steel cable coated in nylon locking nut and colored tops in birch plywood glued with phenol, with knurled non-slip, trimmed with colored films.
Assembled by 8.8 galvanized steel bolts and nuts. Elements covernut under colored nylon. Attacks in galvanized metal, for anchoring to the ground.








    Gallery

    NEWSLETTER