Tortuga Village
n°1 hexagonal tower with roof; n°2 towers with roof; n°2 towers; n°2 climbing ladders; n°1 movable bridge; n°1 rope bridge; n°2 bridges climbing; n°1 horizontal climbing; n°1 climbing horizontal rings; n°2 poles; n°1 wall with holds; n°1 wall bars; n°1 swing; n°1 tunnel slide; n°1 slide with bars; n°2 slides; n°3 small benches.
Request Quote
- Description
- Map
- Technical features
- Request Info
Kids outdoor Play Equipment Tortuga Village. Certificate in accordance with European Standards EN 1176 by the German TÜV - SÜD.
Structure made of wood laminated pine timber autoclave with non-toxic salts.
N°1 turret pool with wooden posts section. 9x9 cm equipped with protective panels in mahogany plywood okoumé grooved phenolic-glued and free of sharp edges and a bench in birch plywood glued with phenol, with knurled non-slip, trimmed with colored films. Dim cm 78x78x260 h
N°2 ladders with rungs made of iroko Ø 45 mm mahogany plywood okoumé grooved phenolic-glued and no edges.
N°1 horizontal climbing made of tubular galvanized steel at 180 °.
N°1 slide bar made with No. 2 round tubes of galvanized steel at 180 °.
N°2 towers with wooden posts section. 9x9 cm equipped with gabled roofs and protective panels both made of mahogany plywood okoumé grooved phenolic-glued and free of sharp edges and a bench for part of birch plywood with phenolic adhesive, non-slip knurled finish, with color films. Dim cm 101x78x350 h.
N°1 tunnel slide h. 150 cm of polyethylene.
N°2 bridges with climbing rope made of nylon with internal steel cable coated in nylon locking nut and colorful.
N°1 back in Sweden consists of rungs iroko Ø 45 mm.
N°1 horizontal climbing with rings made of wooden beam section. 9x12 cm and No. 5 steel rings with non-slip rubber.
N°1 hexagonal tower with wooden posts hexagonal dia. 10 cm equipped with a gabled roof and two protective panels made of mahogany plywood okoumé grooved phenolic-glued and no edges. Diagonal size 146 cm x 73 cm from the side x 350 h.
N°1 slide h. 150 cm of polyethylene.
N°1 bridge made of nylon rope with internal steel cable coated in nylon locking nut and colorful, including planks of wood at the base as support points.
N°1 turret pool with wooden posts section 9x9 cm equipped with protective and decorative panels of mahogany plywood okoumé grooved phenolic-glued and no edges. Dim. cm 101x78x260 h.
N°2 perches made of tubular galvanized steel at 180°C.
N°1 and climbing wall shaped pantograph, made with birch plywood panels finished with phenolic adhesive film on both sides and colored resin marble colored handles.
N°1 swing with wooden posts section 9x9 cm and the beam section of tubular galvanized steel 8x4 cm rectangular painted to 180°C. The seat is made of rubber bumper with internal aluminum profile and chain-mesh welded and hot-galvanized.
All the wooden parts are treated with high-colored stain penetration, non-toxic, wax-based water-soluble.
N°1 turret pool with wooden posts section. 9x9 cm equipped with protective panels in mahogany plywood okoumé grooved phenolic-glued and no edges. Equipped with a bench in birch plywood glued with phenol, with knurled non-slip, trimmed with colored films. Dim. cm 101x78x260 h.
N°1 slide polyethylene h. 150 cm and sides made of mahogany plywood okoumé with phenolic adhesive.
N°1 mobile bridge made of nylon rope with internal steel cable coated in nylon locking nut and colored tops in birch plywood glued with phenol, with knurled non-slip, trimmed with colored films.
Assembled by 8.8 galvanized steel bolts and nuts. Elements covernut under colored nylon. Attacks in galvanized metal, for anchoring to the ground.
Structure made of wood laminated pine timber autoclave with non-toxic salts.
N°1 turret pool with wooden posts section. 9x9 cm equipped with protective panels in mahogany plywood okoumé grooved phenolic-glued and free of sharp edges and a bench in birch plywood glued with phenol, with knurled non-slip, trimmed with colored films. Dim cm 78x78x260 h
N°2 ladders with rungs made of iroko Ø 45 mm mahogany plywood okoumé grooved phenolic-glued and no edges.
N°1 horizontal climbing made of tubular galvanized steel at 180 °.
N°1 slide bar made with No. 2 round tubes of galvanized steel at 180 °.
N°2 towers with wooden posts section. 9x9 cm equipped with gabled roofs and protective panels both made of mahogany plywood okoumé grooved phenolic-glued and free of sharp edges and a bench for part of birch plywood with phenolic adhesive, non-slip knurled finish, with color films. Dim cm 101x78x350 h.
N°1 tunnel slide h. 150 cm of polyethylene.
N°2 bridges with climbing rope made of nylon with internal steel cable coated in nylon locking nut and colorful.
N°1 back in Sweden consists of rungs iroko Ø 45 mm.
N°1 horizontal climbing with rings made of wooden beam section. 9x12 cm and No. 5 steel rings with non-slip rubber.
N°1 hexagonal tower with wooden posts hexagonal dia. 10 cm equipped with a gabled roof and two protective panels made of mahogany plywood okoumé grooved phenolic-glued and no edges. Diagonal size 146 cm x 73 cm from the side x 350 h.
N°1 slide h. 150 cm of polyethylene.
N°1 bridge made of nylon rope with internal steel cable coated in nylon locking nut and colorful, including planks of wood at the base as support points.
N°1 turret pool with wooden posts section 9x9 cm equipped with protective and decorative panels of mahogany plywood okoumé grooved phenolic-glued and no edges. Dim. cm 101x78x260 h.
N°2 perches made of tubular galvanized steel at 180°C.
N°1 and climbing wall shaped pantograph, made with birch plywood panels finished with phenolic adhesive film on both sides and colored resin marble colored handles.
N°1 swing with wooden posts section 9x9 cm and the beam section of tubular galvanized steel 8x4 cm rectangular painted to 180°C. The seat is made of rubber bumper with internal aluminum profile and chain-mesh welded and hot-galvanized.
All the wooden parts are treated with high-colored stain penetration, non-toxic, wax-based water-soluble.
N°1 turret pool with wooden posts section. 9x9 cm equipped with protective panels in mahogany plywood okoumé grooved phenolic-glued and no edges. Equipped with a bench in birch plywood glued with phenol, with knurled non-slip, trimmed with colored films. Dim. cm 101x78x260 h.
N°1 slide polyethylene h. 150 cm and sides made of mahogany plywood okoumé with phenolic adhesive.
N°1 mobile bridge made of nylon rope with internal steel cable coated in nylon locking nut and colored tops in birch plywood glued with phenol, with knurled non-slip, trimmed with colored films.
Assembled by 8.8 galvanized steel bolts and nuts. Elements covernut under colored nylon. Attacks in galvanized metal, for anchoring to the ground.
Overall Dimensions Max: cm 940x815x350h
Fall Height: h 250
Age: 3-12 years
Assembly Time: 12 h
Number of users: 38
Minimum Space: cm 1680x1380
Impact Area: m² 164,00
Data sheet
Esporta Capitolato
Richiedi File DWG
